What Does A Power Inverter Do On An Ambulance?
Ambulances are a quick way to maintain the relationship between patients and hospitals. With the gradual improvement of the healthcare system, the number of ambulances is also increasing. Based on the market and basic medical needs, together with the increasing number of medical devices on ambulances, higher requirements have driven the emergence of inverters. carspa will discuss three aspects. Firstly, it describes the equipment on the ambulance, then it explains the reasons for the need of inverter power supply on the ambulance, and finally it discusses the steps to install the inverter power supply on the ambulance.
What Equipment In The Ambulance Needs Electricity?
The ambulance can be divided into three types: general ambulance, intensive care ambulance and intensive care ambulance, among which the intensive care ambulance has the most complete medical equipment configuration. To meet the needs of intensive care, the ambulance should have at least the following medical devices: ventilator (115W), defibrillation monitor (250W), electrocardiogram (190W), electric suction device (120W), infusion pump (39W), injection pump (35W).
Why Do Ambulances Need Power Inverters?
From the above data, we know that a rescue operation requires at least 749 watts of electricity, and the power inverter is a DC to AC transformer that can convert the 24V DC voltage output by the Adapter to 220V AC. It has the following characteristics: high conversion efficiency and fast start-up; Good safety performance: the product has five protection functions: short circuit, overload, over/under voltage and over temperature. Good physical performance: the product uses full aluminum housing, good heat dissipation, hard oxidation treatment of the surface, good friction resistance, and resistance to extrusion or impact of certain external forces; With load adaptability and stability. Power inverter can provide stable power supply in mobile environment to meet the needs of first aid.
How Do You Install Power Inverter In The Ambulance?
1. Make sure that power inverter is switched off and no flammable gas is produced before wiring and installation.
2. Identify the positive (+) and negative (-) poles of the battery.
3. Install a fuse holder or circuit breaker near the positive (+) pole of the accumulator.
4. Connect one end of the cable to the fuse holder or circuit breaker and the other end to the positive pole (+) of the inverter.
5. Connect the negative (-) of the inverter to the negative (-) of the accumulator with a cable.
6. Select a small piece of cable, connect one end to the fuse base or circuit breaker and mark it as positive (+).
7.Connect the other end of cable 6 to the positive (+) of the accumulator.
8. Insert the insurance card into the fuse holder.
9. Ensure that all cables and terminals are securely secured.
Note: Sparks are normal during the first connection.
Ensure the safety of the connection. Do not over tighten the cable.
If you still have questions about power inverters in the ambulance, you can contact sales08@chinacarspa.com !
