MPPT-MPPT Series 12V/24V 10A-80A

Make the energy maximum from solar panels to charge your system.

The solar battery charger controller is equipped with LCD screen, which not only allows you to check the operation data and status of the device, but also allows you to quickly determine the system fault and change the controller parameters.

The solar controllers of the MPPT series are equipped with deep discharge protection,i.e.with battery voltage decreasing to 11V, the solar controller switches the load off automatically. As soon as the battery is recharged over the solarmodule, the load switches on automatically. 

The MPPT solar controller stops the chargingprocess reliably, when the final charging voltage is reached. This prevents the battery from being damaged by overcharging or heavy steaming. Desulfation function (pulse charging)
Following the regular main charging phase, the solar controller applies pulses to the battery.This causes sulfate layers in the battery to be dissolved which prolongs the battery lifetime significantly. 

The MPPT solar controllers switch off the loadcurrent, when the temperature inside the device is too high. The load output continues to function. When the solar controller has cooled down to normal operating temperature, charging current is reconnected automatically. Reverse polarity protection
The MPPT solar controllers are protected against incorrect connection to the battery. Ensure correct polarity when connecting. The solar controller is reset automatically and ready for use again.